ESEN HK LIMITED
Add to Cart
FPC Connector is used for the module electronics interface.
| NO. | Symbol | Description |
| 1 | LEDA | LED Anode |
| 2 | GND | Power Ground. |
| 3 | RESET | This signal will reset the device,Signal is active low. |
| 4 | RS | Display data/command selection pin in 4-line serial interface. |
| 5 | SDA | SPI interface input/outpur pin. |
| 6 | SCL | This pin is used to be serial interface clock. |
| 7 | VDD | Power Supply for Analog |
| 8 | CS | Chip selection pin,Low enable,High disable. |
| Parameter | Symbol | Min | Max | Unit |
| Supply Voltage (I/O) | VDD | -0.3 | 4.6 | V |
| Analog Supply Voltage Logic Input Voltage |
VDDIO VIN |
-0.3 -0.3 |
4.6 VDD+0.3 |
V V |
| Operation Temperature | Top | -20 | 70 | ℃ |
| Storage Temperature | Tst | -30 | 80 | ℃ |
| Parameter | Symbol | Min | TYP | MAX | Unit |
| Voltage for LED backlight | VbL | 2.9 | 3.0 | 3.1 | V |
| Supply Voltage for Logic | VDD | 2.5 | 2.8 | 3.3 | V |
| Interface Operation Voltage |
Inquiry Cart
0
|